Filter
Top Products
ipv6 interface tunnel source destination IPv6 Commands
page 2-8 Release 5.1.6.R02 User Guide Supplement June 2005
ipv6 interface tunnel source destination
Configures the source and destination IPv4 addresses for a configured tunnel.
ipv6 interface if_name tunnel {[source ipv4_source] [destination ipv4_destination]}
Syntax Definitions
if_name Name assigned to the tunnel interface.
ipv4_source Source IPv4 address for the configured tunnel.
ipv4_destination Destination IPv4 address for the configured tunnel.
Defaults
N/A.
Platforms Supported
OmniSwitch 6624, 6648, 7700, 7800, 8800
Usage Guidelines
Use the ipv6 interface command to create an IPv6 tunnel interface.
Example
-> ipv6 interface Test tunnel 2 source 10.255.11.242 destination 10.255.11.242
Release History
Release 5.1.6; command was introduced.
Related Commands
MIB Objects
IPv6IfIndex
alaIPv6ConfigTunnelv4Source
alaIPv6ConfigTunnelv4Dest
alaIPv6ConfigTunnelRowStatus
ipv6 interface Creates an IPv6 tunnel interface.
show ipv6 tunnel Displays IPv6 Tunnel information.