Alcatel Carrier Internetworking Solutions 6600 Switch User Manual


 
ipv6 rip debug-level IPv6 Commands
page 2-70 Release 5.1.6.R02 User Guide Supplement June 2005
ipv6 rip debug-level
Configures the RIPng debug level for all debug types.
ipv6 rip debug-level level
Syntax Definitions
level Debug level. Valid range is 0 - 255.
Defaults
Platforms Supported
OmniSwitch 6624, 6648, 7700, 7800, 8800
Usage Guidelines
This command sets the debug level for all configured types. You cannot set different levels for each
type.
Use the ipv6 rip debug-type command to specify the type of RIPng messages to debug.
When the debug level is set to 0, the log is turned off.
Example
-> ipv6 rip debug-level 50
Release History
Release 5.1.6; command was introduced.
Related Commands
MIB Objects
alaRipngDebug
alaRipngDebugLevel
parameter default
level 0
ipv6 rip debug-type Configures the type of RIPng messages to debug.