Filter
Top Products
IP Router Configuration
7750 SR OS Router Configuration Guide Page 127
net25_1_2 100 100 3
net2_1_2 100 100 3
net3_1_2 100 100 3
net4_1_2 100 100 3
net5_1_2 100 100 3
net6_1_2 100 100 3
net7_1_2 100 100 3
net8_1_2 100 100 3
net9_1_2 100 100 3
-------------------------------------------------------------------------------
No. of BFD Interfaces: 26
===============================================================================
session
Syntax session [src ip-address [dst ip-address] | detail]
Context show>router>bfd
Description This command displays session information.
Parameters ip-address — Only displays the interface information associated with the specified IP address.
Values ipv4-address a.b.c.d (host bits must be 0)
Output BFD Session Output — The following table describes the show BFD session output fields:
Sample Output
B:CORE2# show router bfd session
===============================================================================
BFD Session
===============================================================================
Interface State Tx Intvl Rx Intvl Mult
Label Description
State
Displays the administrative state for this BFD session.
Protocol
Displays the active protocol.
Tx Intvl
Displays the interval, in milliseconds, between the transmitted BFD mes-
sages to maintain the session
Tx Pkts
Displays the number of transmitted BFD packets.
Rx Intvl
Displays the expected interval, in milliseconds, between the received BFD
messages to maintain the session
Rx Pkts
Displays the number of received packets.
Mult
Displays the integer used by BFD to declare when the neighbor is down.