Filter
Top Products
Filter Policies
7750 SR OS Router Configuration Guide Page 349
Copying Filter Policies
When changes are made to an existing filter policy, they are applied immediately to all services
where the policy is applied. If numerous changes are required, the policy can be copied so you can
edit the “work in progress” version without affecting the filtering process. When the changes are
completed, you can overwrite the work in progress version with the original version.
New filter policies can also be created by copying an existing policy and renaming the new filter.
CLI Syntax: config>filter# copy filter-type src-filter-id [src-entry src-
entry-id] to dst-filter-id [dst-entry dst-entry-id] [over-
write]
The following displays the command usage to copy an existing IP filter (11) to create a new filter
policy (12).
Example: config>filter# copy ip-filter 11 to 12
A:ALA-7>config>filter# info
----------------------------------------------
...
ip-filter 11 create
description "This is new"
scope exclusive
entry 1 create
match
dst-ip 10.10.10.91/24
src-ip 10.10.10.106/24
exit
action drop
exit
entry 2 create
...
ip-filter 12 create
description "This is new"
scope exclusive
entry 1 create
match
dst-ip 10.10.10.91/24
src-ip 10.10.10.106/24
exit
action drop
exit
entry 2 create
...
----------------------------------------------
A:ALA-7>config>filter#