Filter
Top Products
Service Management Tasks
Page 76 7750 SR OS Router Configuration Guide
Service Management Tasks
This section discusses the following service management tasks:
• Changing the System Name on page 76
• Modifying Interface Parameters on page 77
• Deleting a Logical IP Interface on page 78
Changing the System Name
The system command sets the name of the device and is used in the prompt string. Only one
system name can be configured. If multiple system names are configured, the last one configured
will overwrite the previous entry.
Use the following CLI syntax to change the system name:
CLI Syntax: config# system
name system-name
The following example displays the command usage to change the system name:
Example:A:ALA-A>config>system# name TGIF
A:TGIF>config>system#
The following example displays the system name change:
A:ALA-A>config>system# name TGIF
A:TGIF>config>system# info
#------------------------------------------
# System Configuration
#------------------------------------------
name "TGIF"
location "Mt.View, CA, NE corner of FERG 1 Building"
coordinates "37.390, -122.05500 degrees lat."
synchronize
snmp
exit
security
snmp
community "private" rwa version both
exit
exit
. . .
----------------------------------------------
A:TGIF>config>system#