Filter
Top Products
Page 460 7750 SR OS Router Configuration Guide
Modifying Cflowd Collector Parameters
Use the following commands to modify cflowd collector and aggregation parameters:
CLI Syntax: config>cflowd#
[no] collector ip-address[:port]
[no] aggregation
[no] as-matrix
[no] destination-prefix
[no] protocol-port
[no] raw
[no] source-destination-prefix
[no] source-prefix
autonomous-system-type [origin | peer]
no autonomous-system-type
description description-string
no description
[no] shutdown
The following example displays collector and aggregation configuration command usage:
Example: config>cflowd# collector 10.10.10.1:2000
config>cflowd>collector# no aggregation
config>cflowd>collector# exit
config>cflowd# 10.10.10.1:2000
config>cflowd>collector$ no shutdown
config>cflowd>collector# aggregation
config>cflowd>coll>agg# no protocol-port
config>cflowd>coll>agg# no source-destination-prefix
config>cflowd>coll>agg# raw
config>cflowd>coll>agg# source-prefix
config>cflowd>coll>agg# exit
config>cflowd>collector# no autonomous-system-type
config>cflowd>collector# description "Test collector"
config>cflowd>collector# exit