Filter
Top Products
Page 380 7750 SR OS Router Configuration Guide
Default no src-ip — no source IP match criterion
Parameters ip-address — The IP prefix for the IP match criterion in dotted decimal notation.
Values 0.0.0.0 — 255.255.255.255
mask — The subnet mask length expressed as a decimal integer.
Values 0 — 32
netmask — Any mask epressed in dotted quad notation.
Values 0.0.0.0 — 255.255.255.255
src-ip
Syntax src-ip [ipv6-address/prefix-length]
no src-ip
Context config>filter>ipv6-filter>entry>match
Description This command configures a source IPv6 address range to be used as an IP filter match criterion.
The no form of the command removes the source IPv6 address match criterion.
Default no src-ip - no source IP match criterion
Parameters ipv6-address — The IP prefix for the IP match criterion in dotted decimal notation.
Values x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x [0..FFFF]H
d [0 — 255]D
prefix-length — The IPv6 mask value for the IPv6 filter entry.
Values 1 — 28
src-port
Syntax src-port {lt | gt | eq} src-port-number
src-port range start end
no src-port
Context config>filter>ip-filter>entry>match
config>filter>ipv6-filter>entry>match
Description This command configures a source TCP or UDP port number or port range for an IP filter match
criterion.
The no form of the command removes the source port match criterion.
Default No src-port match criterion