Filter
Top Products
Filter Policies
7750 SR OS Router Configuration Guide Page 329
Creating a Redirect Policy
Configuring and applying redirect policies is optional. Each redirect policy must have the
following:
• A destination IP address
• A priority (default is 100)
• At least one of the following tests must be enabled:
→ Ping test
→ SNMP test
→ URL test
Use the following CLI syntax to create a redirect policy:
CLI Syntax: config>filter# redirect-policy redirect-policy-name
description
description-string
destination ip-address
description description-string
ping-test
drop-count consecutive-failures [hold-down seconds]
interval seconds
timeout seconds
priority priority
[no] shutdown
snmp-test test-name
drop-count consecutive-failures [hold-down seconds]
interval seconds
oid oid-string community community-string
return-value return-value type return-type [disable|
lower-priority priority|raise-priority priority]
timeout seconds
url-test test-name
drop-count consecutive-failures [hold-down seconds]
interval seconds
return-code return-code-1 [ return-code-2] [disable |
lower-priority priority | raise-priority priority]
timeout seconds
url url-string [http-version version-string]
[no] shutdown