Filter
Top Products
Cflowd
7750 SR OS Router Configuration Guide Page 449
Enabling Cflowd
Cflowd is disabled by default. You must enter the no shutdown command to administratively
enable traffic sampling.
Use the following CLI syntax to enable cflowd:
CLI Syntax: config# cflowd
no shutdown
The following example displays the default values when cflowd is initially enabled. No collectors
or collector options are configured.
ALA-1>config# info detail
...
#------------------------------------------
echo "Cflowd Configuration"
#------------------------------------------
cflowd
active-timeout 30
cache-size 65536
inactive-timeout 15
overflow 1
rate 1000
no shutdown
exit
#------------------------------------------
ALA-1>config#