Filter
Top Products
Filter Policies
7750 SR OS Router Configuration Guide Page 391
hold-down seconds — The amount of time, in seconds, that the system should be held down if any
of the test has marked it unreachable.
Values 0 — 86400
interval
Syntax interval seconds
no interval
Context config>filter>destination>ping-test
config>filter>destination>snmp-test
config>filter>destination>url-test
Description This command specifies the amount of time, in seconds, between consecutive requests sent to the far
end host.
Default 1
Parameters seconds — Specifies the amount of time, in seconds, between consecutive requests sent to the far end
host.
Values 1 — 60
timeout
Syntax timeout seconds
no timeout
Context config>filter>destination>snmp-test
config>filter>destination>url-test
Description Specifies the amount of time, in seconds, that is allowed for receiving a response from the far-end
host. If a reply is not received within this time the far-end host is considered unresponsive.
Default 1
Parameters seconds — Specifies the amount of time, in seconds, that is allowed for receiving a response from the
far end host.
Values 1 — 60
priority
Syntax priority priority
no priority
Context config>filter>destination