Alcatel-Lucent 7750 SR OS Network Router User Manual


 
Show Commands
Page 158 7750 SR OS Router Configuration Guide
tunnel-table
Syntax tunnel-table [ip-address[/mask]] [protocol protocol | sdp sdp-id] [summary]
Context show>router
Description This command displays tunnel table information.
Note that auto-bind GRE tunnels are not displayed in show command output. GRE tunnels are not the
same as SDP tunnels that use the GRE encapsulation type. When the auto-bind command is used when
configuring a VPRN service, it means the MP-BGP NH resolution is refering to the core routing
instance for IP reachability. For a VPRN service this object specifies the lookup to be used by the
routing instance if no SDP to the destination exists.
Parameters [ip-address[/mask]]Displays the specified tunnel table’s destination IP address and mask.
protocol protocolDislays LDP protocol information.
sdp sdp-idDisplays information pertaining to the specified SDP.
summary — Displays summary tunnel table information.
Output Tunnel Table Output — The following table describes tunnel table output fields.
Sample Output
A:ALA-A>config>service# show router tunnel-table
===============================================================================
Tunnel Table
===============================================================================
DestinationOwner Encap Tunnel Id Pref Nexthop Metric
-------------------------------------------------------------------------------
10.0.0.1/32 sdp GRE 10 5
10.0.0.1 0
10.0.0.1/32 sdp GRE 21 5 10.0.0.1 0
10.0.0.1/32 sdp GRE 31 5 10.0.0.1 0
10.0.0.1/32 sdp GRE 41 5 10.0.0.1 0
===============================================================================
A:ALA-A>config>service#
Label Description
Destination
The route’s destination address and mask.
Owner
Specifies the tunnel owner.
Encap
Specifies the tunnel’s encapsulation type.
Tunnel ID
Specifies the tunnel (SDP) identifier.
Pref
Specifies the route preference for routes learned from the configured
peer(s).
Nexthop
The next hop for the route’s destination.
Metric
The route metric value for the route.