Filter
Top Products
List of Commands
Page 302 7750 SR OS Router Configuration Guide
List of Commands
Table 18 lists all the filter configuration commands indicating the configuration level at which
each command is implemented with a short command description. The filter policy command list
is organized in the following task-oriented manner:
• Configure an IP filter policy
→ Configure an IP filter policy entry
→ Configure IP filter entry matching criteria
• Configure an IPv6 filter policy
→ Configure an IPv6 filter policy entry
→ Configure an IPv6 filter entry matching criteria
• Configure a MAC filter policy entry
→ Configure MAC filter entry matching criteria
• Configure a redirect policy
Table 18: CLI Commands to Configure Filter Policies Parameters
Command Description Page
Configure an IP filter policy
config>filter
ip-filter
Creates an IP filter policy. 358
default-action
The default action specifies the action to be applied to packets when the
packets do not match the specified criteria in any of the IP filter entries of
the filter.
363
description
A text string describing the filter policy. 357
renum
Renumbers existing filter entries to properly sequence filter entries. 388
scope
Configures the filter policy scope as exclusive or template. An exclusive
policy can only be applied to a single entity (SAP or network port). A
template policy can be applied to multiple SAPs or network ports.
363
Configure an IP filter policy entry
config>filter>ip-filter
entry
Creates a filter entry and identifies a group of match criteria and the
corresponding action.
364
action
Creates the drop or forward action associated with the match criteria. If
not specified, the filter policy entry is not taken into account.
366
description
A text string describing the entry. 357