Show Commands
Page 152 7750 SR OS Router Configuration Guide
===============================================================================
A:ALA-A#
A:ALA-A# show router static-arp to-ser1
===============================================================================
ARP Table
===============================================================================
IP Address MAC Address Age Type Interface
-------------------------------------------------------------------------------
10.200.0.253 00:00:5a:40:00:01 00:00:00 Sta to-ser1
===============================================================================
A:ALA-A#
A:ALA-A# show router static-arp mac 00:00:5a:40:00:01
===============================================================================
ARP Table
===============================================================================
IP Address MAC Address Age Type Interface
-------------------------------------------------------------------------------
10.200.0.253
00:00:5a:40:00:01 00:00:00 Sta to-ser1
===============================================================================
A:ALA-A#
static-route
Syntax static-route [family] [[ip-prefix [/mask]] | [preference preference] | [next-hop ip-address] |
tag tag]
Context show>router
Description This command displays the static entries in the routing table.
If no options are present, all static routes are displayed sorted by prefix.
Parameters family — Specify the type of routing information to be distributed by this peer group.
Values ipv4 — Displays only those BGP peers that have the IPv4 family enabled and not
those capable of exchanging IP-VPN routes.
ipv6 — Displays the BGP peers that are IPv6 capable.
mcast-ipv4 — Displays the BGP peers that are IPv4 multicast capable.
ip-prefix[/mask] — Displays static routes only matching the specified ip-prefix and optional mask.
Values ipv4-prefix: a.b.c.d (host bits must be 0)
ipv4-prefix-length: 0 — 32
ipv6-prefix: x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0 — FFFF]H
d: [0 — 255]D
ipv6-prefix-length: 0 — 128
preference preference — Only displays static routes with the specified route preference.
Values 0 — 65535