Filter
Top Products
IP Router Configuration
7750 SR OS Router Configuration Guide Page 71
Creating an IP Address Range
An IP address range can be reserved for exclusive use for services by defining the
config>router>service-prefix command. When the service is configured, the IP address
must be in the range specified as a service prefix. If no service prefix command is configured, then
no limitation exists.
The
no service-prefix ip-prefix/mask command removes all address reservations. A
service prefix cannot be removed while one or more services use address(es) in the range to be
removed.
CLI Syntax: config>router
service-prefix ip-prefix/mask [exclusive]
Example
: config>router# service-prefix