Filter
Top Products
Show Commands
Page 262 7750 SR OS Router Configuration Guide
vrid vrid — Displays detailed information for the specified VRRP instance on the IP interface.
Default All VRIDs for the IP interface.
Values 1 — 255
Output VRRP Instance Output — The following table describes the instance command output fields for
VRRP.
Table 10: Show VRRP Instance Output
Label Description
Interface name
The name of the IP interface.
VR ID
The virtual router ID for the IP interface
Own
Owner
Yes — Specifies that the virtual router instance as owning the
virtual router IP addresses.
No — Indicates that the virtual router instance is operating as a
non-owner.
Adm
Up — Indicates that the administrative state of the VRRP
instance is up.
Down — Indicates that the administrative state of the VRRP
instance is down.
Opr
Up — Indicates that the operational state of the VRRP instance
is up.
Down — Indicates that the operational state of the VRRP
instance is down.
State
When owner, backup defines the IP addresses that are
advertised within VRRP advertisement messages.
When non-owner, backup actually creates an IP interface IP
address used for routing IP packets and communicating with the
system when the access commands are defined (ping-reply, tel-
net-reply, and ssh-reply).
Pol Id
The value that uniquely identifies a Priority Control Policy.
Base Priority
The base-priority value used to derive the in-use priority of the
virtual router instance as modified by any optional VRRP
priority control policy.
InUse Priority
The current in-use priority associated with the VRRP virtual
router instance.
Msg Int
The administrative advertisement message timer used by the
master virtual router instance to send VRRP advertisement mes-
sages and to derive the master down timer as backup.