Filter
Top Products
IP Router Configuration
7750 SR OS Router Configuration Guide Page 75
Configuring an Autonomous System
Configuring an autonomous system is optional. Use the following CLI syntax to configure an
autonomous system:
CLI Syntax: config>router
autonomous-system as-number
The following example displays the autonomous system configuration command usage:
Example: config>router# autonomous-system 100
config>router#
The following example displays the autonomous system configuration:
A;ALA-A>config>router# info
#------------------------------------------
# IP Configuration
#------------------------------------------
interface "system"
address 10.10.10.103/32
exit
interface "to-104"
address 10.0.0.103/24
port 1/1/1
exit
exit
autonomous-system 100
router-id 10.10.10.103
#------------------------------------------
A:ALA-A>config>router#