Filter
Top Products
Filter Policies
7750 SR OS Router Configuration Guide Page 411
Entry
The filter ID filter entry ID. If the filter entry ID indicates the entry is
(Inactive), then the filter entry is incomplete as no action has been
specified.
Log Id
The filter log ID.
Src. IP
The source IP address and mask match criterion. 0.0.0.0/0 indicates
no criterion specified for the filter entry.
Dest. IP
The destination IP address and mask match criterion. 0.0.0.0/0 indi-
cates no criterion specified for the filter entry.
Protocol
The protocol ID for the match criteria. Undefined indicates no proto-
col specified.
ICMP Type
The ICMP type match criterion. Undefined indicates no ICMP type
specified.
Fragment Off — Configures a match on all non-fragmented IP packets.
On — Configures a match on all fragmented IP packets.
Sampling Off — Specifies that traffic sampling is disabled.
On — Specifies that traffic matching the associated IP filter entry is
sampled.
IP-Option
Specifies matching packets with a specific IP option or a range of IP
options in the IP header for IP filter match criteria.
TCP-syn Off — Specifies that the SYN bit is disabled.
On — Specifies that the SYN bit is set.
Match action Default — The filter does not have an explicit forward or drop
match action specified. If the filter entry ID indicates the entry is
(Inactive), then the filter entry is incomplete as no action has been
specified.
Drop — Drop packets matching the filter entry.
Forward — The explicit action to perform is forwarding of the
packet. If the action is Forward, then if configured the nexthop infor-
mation should be displayed, including Nexthop: <IP address>, Indi-
rect: <IP address> or Interface: <IP interface name>.
Forward - indirect: ip-addr
Forward - interface: ip-int-name
Forward - next-hop: ip-addr
Ing. Matches
The number of ingress filter matches/hits for the filter entry.
Src. Port
The source TCP or UDP port number or port range.
Label Description (Continued)