Filter
Top Products
Show Commands
Page 422 7750 SR OS Router Configuration Guide
Entry : 200 FrameType : 802.2SNAP
Ing. Matches: 0 Egr. Matches : 0
Entry : 300 (Inactive) FrameType : Ethernet
Ing. Matches: 0 Egr. Matches : 0
===============================================================================
redirect-policy
Syntax redirect-policy {redirect-policy-name [dest ip-address] [association]}
Context show>filter
Description Displays redirect filter information.
Parameters redirect-policy-name — Displays information for the specified redirect policy.
dest ip-address — Directs the router to use a specified IP address for communication.
association — Appends association information.
Output Redirect Policy Output — The following table describes the fields in the redirect policy
command output.
Label Description
Redirect Policy
Specifies a specific redirect policy.
Applied
Specifies whether the redirect policy is applied to a filter policy entry.
Description
Displays the user-provided description for this redirect policy.
Active Destina-
tion
ip address — Specifies the IP address of the active destination.
none — Indicates that there is currently no active destination.
Destination
Specifies the destination IP address.
Oper Priority
Specifies the operational value of the priority for this destination. The
highest operational priority across multiple destinations is used as the
preferred destination.
Admin Priority
Specifies the configured base priority for the destination.
Admin State
Specifies the configured state of the destination.
Out of Service — Tests for this destination will not be conducted.
Oper State
Specifies the operational state of the destination.
Ping Test
Specifies the name of the ping test.
Timeout
Specifies the amount of time in seconds that is allowed for receiving a
response from the far-end host. If a reply is not received within this
time the far-end host is considered unresponsive.