Filter
Top Products
Filter Management Tasks
Page 338 7750 SR OS Router Configuration Guide
Modifying an IP Filter Policy
To access a specific IP filter, you must specify the filter ID. Use the no form of the command to
remove the command parameters or return the parameter to the default setting.
Example: config>filter>ip-filter# description "New IP filter info"
config>filter>ip-filter# entry 2 create
config>filter>ip-filter>entry$ description "new entry"
config>filter>ip-filter>entry# action drop
config>filter>ip-filter>entry# match dst-ip 10.10.10.104/32
config>filter>ip-filter>entry# exit
config>filter>ip-filter#
The following output displays the modified IP filter output:
A:ALA-7>config>filter# info
----------------------------------------------
..
ip-filter 11 create
description "New IP filter info"
scope exclusive
entry 1 create
match
dst-ip 10.10.10.91/24
src-ip 10.10.10.106/24
exit
action drop
exit
entry 2 create
description "new entry"
match
dst-ip 10.10.10.104/32
exit
action drop
exit
entry 10 create
match
dst-ip 10.10.10.91/24
src-ip 10.10.0.100/24
exit
action drop
exit
entry 15 create
description "no-91"
match
dst-ip 10.10.10.91/24
src-ip 10.10.10.103/24
exit
action forward
exit
entry 30 create
match
dst-ip 10.10.10.91/24
src-ip 10.10.0.200/24
exit
action forward
exit