Filter
Top Products
Show Commands
Page 266 7750 SR OS Router Configuration Guide
policy
Syntax policy [vrrp-policy-id [event event-type specific-qualifier]]
Context show>vrrp
Description This command displays VRRP priority control policy information.
If no command line options are specified, a summary of the VRRP priority control event policies dis-
plays.
Parameters vrrp-policy-id — Displays information on the specified priority control policy ID.
Default All VRRP policies IDs
Values 1 — 9999
event event-type specific-qualifier — Displays information on the specified VRRP priority control
event within the policy ID.
Default All event types and qualifiers
Values port-down port-id
lag-port-down lag-id
host-unreachable host-ip-addr
route-unknown route-prefix/mask
Output VRRP Policy Output — The following table describes the VRRP policy command output fields.
Table 11: Show VRRP Policy Output
Label Description
Policy Id
The VRRP priority control policy associated with the VRRP vir-
tual router instance.
A value of 0 indicates that no control policy policy is associated
with the virtual router instance.
Current Priority & Effects
Current Explicit
When multiple explicitly defined events associated with the pri-
ority control policy happen simultaneously, the lowest value of
all the current explicit priorities will be used as the in-use prior-
ity for the virtual router.
Current Delta Sum
The sum of the priorities of all the delta events when multiple
delta events associated with the priority control policy happen
simultaneously. This sum is subtracted from the base priority of
the virtual router to give the in-use priority.