Filter
Top Products
IP Router Configuration
7750 SR OS Router Configuration Guide Page 73
Configuring a Confederation
Configuring a confederation is optional. The AS and confederation topology design should be
carefully planned. Autonomous system (AS), confederation, and BGP connection and peering
parameters must be explicitly created on each participating SR. Identify AS numbers,
confederation numbers, and members participating in the confederation.
Refer to the BGP section for CLI syntax and command descriptions.
Use the following CLI syntax to configure a confederation:
CLI Syntax: config>router
confederation confed-as-num members member-as-num
The following example displays the commands to configure the confederation topology diagram
displayed in Figure 1 on page 25.
Example:ALA-B>config>router# autonomous-system 200
ALA-B>config>router# confederation 2002 members 200 300 400
ALA-B>config>router# exit
ALA-C>config>router# autonomous-system 200
ALA-C>config>router# confederation 2002 members 200 300 400
ALA-C>config>router# exit
ALA-D>config>router# autonomous-system 400
ALA-D>config>router# confederation 2002 members 200 300 400
ALA-D>config>router# exit
ALA-E>config>router# autonomous-system 300
ALA-E>config>router# confederation 2002 members 200 300 400
ALA-E>config>router# exit
ALA-F>config>router# autonomous-system 300
ALA-F>config>router# confederation 2002 members 200 300 400
ALA-F>config>router# exit
ALA-G>config>router# autonomous-system 300
ALA-G>config>router# confederation 2002 members 200 300 400
ALA-G>config>router# exit