Filter
Top Products
AT-WR4500 Series - IEEE 802.11abgh Outdoor Wireless Routers 115
RouterOS v3 Configuration and User Guide
Configuration of the IP addresses:
[admin@PB-Router] ip address> print
Flags: X - disabled, I - invalid, D - dynamic
# ADDRESS NETWORK BROADCAST INTERFACE
0 192.168.0.1/24 192.168.0.0 192.168.0.255 Local1
1 192.168.1.1/24 192.168.1.0 192.168.1.255 Local2
2 10.0.0.7/24 10.0.0.0 10.0.0.255 Public
[admin@PB-Router] ip address>
To achieve the described result, follow these configuration steps:
Mark packets from network 192.168.0.0/24 with a new-routing-mark=net1, and packets from network
192.168.1.0/24 with a new-routing-mark=net2:
[admin@PB-Router] ip firewall mangle> add src-address=192.168.0.0/24 \
\... action=mark-routing new-routing-mark=net1 chain=prerouting
[admin@PB-Router] ip firewall mangle> add src-address=192.168.1.0/24 \
\... action=mark-routing new-routing-mark=net2 chain=prerouting
[admin@PB-Router] ip firewall mangle> print
Flags: X - disabled, I - invalid, D - dynamic
0 chain=prerouting src-address=192.168.0.0/24 action=mark-routing
new-routing-mark=net1
1 chain=prerouting src-address=192.168.1.0/24 action=mark-routing
new-routing-mark=net2
[admin@PB-Router] ip firewall mangle>
Route packets from network 192.168.0.0/24 to gateway GW_1 (10.0.0.2), packets from network
192.168.1.0/24 to gateway GW_2 (10.0.0.3), using the according packet marks. If GW_1 or GW_2 fails
(does not reply to pings), route the respective packets to GW_Main (10.0.0.1):
[admin@PB-Router] ip route> add gateway=10.0.0.2 routing-mark=net1 \
\... check-gateway=ping
[admin@PB-Router] ip route> add gateway=10.0.0.3 routing-mark=net2 \
\... check-gateway=ping
[admin@PB-Router] ip route> add gateway=10.0.0.1
[admin@PB-Router] ip route> print
Flags: X - disabled, A - active, D - dynamic,
C - connect, S - static, r - rip, b - bgp, o - ospf
# DST-ADDRESS PREFSRC G GATEWAY DISTANCE INTERFACE
0 ADC 10.0.0.0/24 10.0.0.7 Public
1 ADC 192.168.0.0/24 192.168.0.1 Local1
2 ADC 192.168.1.0/24 192.168.1.1 Local2
3 A S 0.0.0.0/0 r 10.0.0.2 Public
4 A S 0.0.0.0/0 r 10.0.0.3 Public
5 A S 0.0.0.0/0 r 10.0.0.1 Public
[admin@PB-Router] ip route>