Allied Telesis AT-WR4500 Network Router User Manual


 
AT-WR4500 Series - IEEE 802.11abgh Outdoor Wireless Routers 81
RouterOS v3 Configuration and User Guide
Example
To monitor a bridge port:
[admin@AT-WR4562] interface bridge port> mo 0
status: in-bridge
port-number: 1
role: designated-port
edge-port: no
edge-port-discovery: yes
point-to-point-port: no
external-fdb: no
sending-rstp: no
learning: yes
forwarding: yes
-- [Q quit|D dump|C-z pause]
4.5.6 Bridge Host Monitoring
Command name: /interface bridge host
Property Description
age (read-only: time) - the time since the last packet was received from the host
bridge (read-only: name) - the bridge the entry belongs to
local (read-only: flag) - whether the host entry is of the bridge itself (that way all local interfaces are
shown)
mac-address (read-only: MAC address) - host's MAC address
on-interface (read-only: name) - which of the bridged interfaces the host is connected to
Example
To get the active host table:
[admin@AT-WR4562] interface bridge host> print
Flags: L - local
BRIDGE MAC-ADDRESS ON-INTERFACE AGE
bridge1 00:00:B4:5B:A6:58 ether1 4m48s
bridge1 00:30:4F:18:58:17 ether1 4m50s
L bridge1 00:50:08:00:00:F5 ether1 0s
L bridge1 00:50:08:00:00:F6 ether2 0s
bridge1 00:60:52:0B:B4:81 ether1 4m50s
bridge1 00:C0:DF:07:5E:E6 ether1 4m46s
bridge1 00:E0:C5:6E:23:25 prism1 4m48s
bridge1 00:E0:F7:7F:0A:B8 ether1 1s
[admin@AT-WR4562] interface bridge host>
4.5.7 Bridge Firewall General Description
Specifications
Submenu level: /interface bridge filter, /interface bridge nat, /interface bridge broute
Description
The bridge firewall implements packet filtering and thereby provides security functions that are used to
manage data flow to, from and through bridge.
Packets between bridged interfaces, just like any other IP traffic, are also passed through the 'generic' /ip
firewall rules (but bridging filters are always applied before IP filters/NAT of the built-in chain of the
same name, except for the output which is executed after IP Firewall Output). These rules can be used
with real, physical receiving/transmitting interfaces, as well as with bridge interface that simply groups
the bridged interfaces.