Filter
Top Products
50 AT-WR4500 Series - IEEE 802.11abgh Outdoor Wireless Routers
RouterOS v3 Configuration and User Guide
5960:0,5965:0,5970:0,5975:0,5980:0,5985:0,5990:0,5995:0,
6000:0,6005:0,6010:0,6015:0,6020:0,6025:0,6030:0,6035:0,
6040:0,6045:0,6050:0,6055:0,6060:0,6065:0,6070:0,6075:0,
6080:0,6085:0,6090:0,6095:0,6100:0
2ghz-g-channels=2312:0,2317:0,2322:0,2327:0,2332:0,2337:0,2342:0,2347:0,
2352:0,2357:0,2362:0,2367:0,2372:0,2377:0,2382:0,2387:0,
2392:0,2397:0,2402:0,2407:0,2412:0,2417:0,2422:0,2427:0,
2432:0,2437:0,2442:0,2447:0,2452:0,2457:0,2462:0,2467:0,
2472:0,2477:0,2482:0,2487:0,2492:0,2497:0,2314:0,2319:0,
2324:0,2329:0,2334:0,2339:0,2344:0,2349:0,2354:0,2359:0,
2364:0,2369:0,2374:0,2379:0,2384:0,2389:0,2394:0,2399:0,
2404:0,2409:0,2414:0,2419:0,2424:0,2429:0,2434:0,2439:0,
2444:0,2449:0,2454:0,2459:0,2464:0,2469:0,2474:0,2479:0,
2484:0,2489:0,2494:0,2499:0
2ghz-g-turbo-channels=2312:0,2317:0,2322:0,2327:0,2332:0,2337:0,2342:0,
2347:0,2352:0,2357:0,2362:0,2367:0,2372:0,2377:0,
2382:0,2387:0,2392:0,2397:0,2402:0,2407:0,2412:0,
2417:0,2422:0,2427:0,2432:0,2437:0,2442:0,2447:0,
2452:0,2457:0,2462:0,2467:0,2472:0,2477:0,2482:0,
2487:0,2492:0,2497:0,2314:0,2319:0,2324:0,2329:0,
2334:0,2339:0,2344:0,2349:0,2354:0,2359:0,2364:0,
2369:0,2374:0,2379:0,2384:0,2389:0,2394:0,2399:0,
2404:0,2409:0,2414:0,2419:0,2424:0,2429:0,2434:0,
2439:0,2444:0,2449:0,2454:0,2459:0,2464:0,2469:0,
2474:0,2479:0,2484:0,2489:0,2494:0,2499:0
[admin@AT-WR4562] interface wireless>
4.3.9 Virtual Access Point Interface
Submenu level: /interface wireless
Description
Virtual Access Point (VAP) interface is used to have an additional AP. You can create a new AP with
different ssid and mac-address. It can be compared with a VLAN where the ssid from VAP is the
VLAN tag and the hardware interface is the VLAN switch.
You can add up to 128 VAP interfaces for each hardware interface.
RouterOS supports VAP feature for Atheros AR5212 and newer.
Property Description
area (text; default: "") - string value that is used to describe an Access Point. Connect List on the
Client's side comparing this string value with area-prefix string value makes decision whether allow a
Client connect to the AP. If area-prefix match the entire area string or only the beginning of it the
Client is allowed to connect to the AP
arp (disabled | enabled | proxy-arp | reply-only) - ARP mode
default-ap-tx-limit (integer; default: 0) - limits data rate for each wireless client (in bps)
0 - no limits
default-authentication (yes | no; default: yes) - whether to accept or reject a client that wants to
associate, but is not in the access-list
default-client-tx-limit (integer; default: 0) - limits each client's transmit data rate (in bps). Works only if
the client is also a Router
0 - no limits
default-forwarding (yes | no; default: yes) - whether to forward frames to other AP clients or not
disable-running-check (yes | no; default: no) - disable running check. For 'broken' cards it is a good
idea to set this value to 'yes'
disabled (yes | no; default: yes) - whether to disable the interface or not
hide-ssid (yes | no; default: no) - whether to hide ssid or not in the beacon frames:
yes - ssid is not included in the beacon frames. AP replies only to probe-requests with the given ssid
no - ssid is included in beacon frames. AP replies to probe-requests with the given ssid and to 'broadcast
ssid'
mac-address (MAC address; default: 02:00:00:AA:00:00) - MAC address of VAP. You can define your
own value for mac-address
master-interface (name) - hardware interface to use for VAP