Filter
Top Products
226 AT-WR4500 Series - IEEE 802.11abgh Outdoor Wireless Routers
RouterOS v3 Configuration and User Guide
• /ip hotspot service-port - address translation helpers for the one-to-one NAT
• /ip hotspot walled-garden - Walled Garden rules at HTTP level (DNS names, HTTP request
substrings)
• /ip hotspot walled-garden ip - Walled Garden rules at IP level (IP addresses, IP protocols)
• /ip hotspot user - local HotSpot system users
• /ip hotspot user profile - local HotSpot system users profiles (user groups)
• /ip hotspot active - dynamic list of all authenticated HotSpot users
• /ip hotspot cookie - dynamic list of all valid HTTP cookies
10.1.2 Question&Answer-Based Setup
Command name: /ip hotspot setup
Questions
address pool of network (name) - IP address pool for the HotSpot network
dns name (text) - DNS domain name of the HotSpot gateway (will be statically configured on the local
DNS proxy
dns servers (IP address,[IP address]) - DNS servers for HotSpot clients
hotspot interface (name) - interface to run HotSpot on
ip address of smtp server (IP address; default: 0.0.0.0) - IP address of the SMTP server to redirect SMTP
requests (TCP port 25) to (0.0.0.0 - no redirect )
local address of network (IP address; default: 10.5.50.1/24) - HotSpot gateway address for the interface
masquerade network (yes | no; default: yes) - whether to masquerade the HotSpot network
name of local hotspot user (text; default: admin) - username of one automatically created user
passphrase (text) - the passphrase of the certificate you are importing
password for the user (text) - password for the automatically created user
select certificate (name | none import-other-certificate) - choose SSL certificate from the list of the
imported certificates
• none - do not use SSL
• import-other-certificate - setup the certificates not imported yet, and ask this question again
Depending on current settings and answers to the previous questions, default values of following
questions may be different. Some questions may disappear if they become redundant
Example
To configure HotSpot on ether1 interface (which is already configured with address of 192.0.2.1/25), and
adding user admin with password rubbish:
[admin@AT-WR4562] > ip hotspot setup
hotspot interface: ether1
local address of network: 192.0.2.1/24
masquerade network: yes
address pool of network: 192.0.2.2-192.0.2.126
select certificate: none
ip address of smtp server: 0.0.0.0
dns servers: 192.0.2.254
dns name: hs.example.net
name of local hotspot user: admin
password for the user: rubbish
[admin@AT-WR4562] >