Filter
Top Products
140 AT-WR4500 Series - IEEE 802.11abgh Outdoor Wireless Routers
RouterOS v3 Configuration and User Guide
Name VendorID
Value
RFC where it is defined
MS-CHAP2-Success 311 26 RFC2548
MS-MPPE-Encryption-Policy 311 7 RFC2548
MS-MPPE-Encryption-Types 311 8 RFC2548
MS-MPPE-Recv-Key 311 17 RFC2548
MS-MPPE-Send-Key 311 16 RFC2548
NAS-Identifier
32 RFC2865
NAS-Port
5 RFC2865
NAS-IP-Address
4 RFC2865
NAS-Port-Id
87 RFC2869
NAS-Port-Type
61 RFC2865
Port-Limit
62 RFC2865
Service-Type
6 RFC2865
Session-Timeout
27 RFC2865
User-Name
1 RFC2865
User-Password
2 RFC2865
WISPr-Bandwidth-Max-Down 14122 8 wi-fi.org
WISPr-Bandwidth-Max-Up 14122 7 wi-fi.org
WISPr-Bandwidth-Min-Down 14122 6 wi-fi.org
WISPr-Bandwidth-Min-Up 14122 5 wi-fi.org
WISPr-Location-Id 14122 1 wi-fi.org
WISPr-Location-Name 14122 2 wi-fi.org
WISPr-Logoff-URL 14122 3 wi-fi.org
WISPr-Redirection-URL 14122 4 wi-fi.org
WISPr-Session-Terminate-Time
14122 9 wi-fi.org
7.1.6 Troubleshooting
Description
My radius server accepts authentication request from the client with "Auth: Login OK:...", but the user
cannot log on. The bad replies counter is incrementing under radius monitor
This situation can occur, if the radius client and server have high delay link between them. Try to increase
the radius client's timeout to 600ms or more instead of the default 300ms! Also, double check, if the
secrets match on client and server.