Filter
Top Products
AT-WR4500 Series - IEEE 802.11abgh Outdoor Wireless Routers 245
RouterOS v3 Configuration and User Guide
advertise-url (multiple choice: text; default: http://www.alliedtelesis.com/) - list of URLs to show as
advertisement popups. The list is cyclic, so when the last item reached, next time the first is shown
idle-timeout (time | none; default: none) - idle timeout (maximal period of inactivity) for authorized
clients. It is used to detect, that client is not using outer networks (e.g. Internet), i.e., there is NO
TRAFFIC coming from that client and going through the router. Reaching the timeout, user will be logged
out, dropped of the host list, the address used by the user will be freed, and the session time accounted
will be decreased by this value
none - do not timeout idle users
incoming-filter (name) - name of the firewall chain applied to incoming packets from the users of this
profile
incoming-packet-mark (name) - packet mark put on all the packets from every user of this profile
automatically
keepalive-timeout (time | none; default: 00:02:00) - keepalive timeout for authorized clients. Used to
detect, that the computer of the client is alive and reachable. If check will fail during this period, user will
be logged out, dropped of the host list, the address used by the user will be freed, and the session time
accounted will be decreased by this value
none - do not timeout unreachable users
name (name) - profile reference name
on-login (text; default: "") - script name to launch after a user has logged in
on-logout (text; default: "") - script name to launch after a user has logged out
open-status-page (always | http-login; default: always) - whether to show status page also for users
authenticated using mac login method. Useful if you want to put some information (for example, banners
or popup windows) in the alogin.html page so that all users would see it
http-login - open status page only in case of HTTP login (including cookie and https login methods)
always - open the status page in case of mac login as well once the user opens any web page
outgoing-filter (name) - name of the firewall chain applied to outgoing packets to the users of this
profile
outgoing-packet-mark (name) - packet mark put on all the packets to every user of this profile
automatically
rate-limit (text; default: "") - Rate limitation in form of rx-rate[/tx-rate] [rx-burst-rate[/tx-burst-
rate] [rx-burst-threshold[/tx-burst-threshold] [rx-burst-time[/tx-burst-time] [priority] [rx-
rate-min[/tx-rate-min]]]] from the point of view of the router (so "rx" is client upload, and "tx" is
client download). All rates should be numbers with optional 'k' (1,000s) or 'M' (1,000,000s). If tx-rate is
not specified, rx-rate is as tx-rate too. Same goes for tx-burst-rate and tx-burst-threshold and tx-burst-
time. If both rx-burst-threshold and tx-burst-threshold are not specified (but burst-rate is specified), rx-
rate and tx-rate is used as burst thresholds. If both rx-burst-time and tx-burst-time are not specified, 1s is
used as default. Priority takes values 1..8, where 1 implies the highest priority, but 8 - the lowest. If rx-
rate-min and tx-rate-min are not specified rx-rate and tx-rate values are used. The rx-rate-min and tx-
rate-min values can not exceed rx-rate and tx-rate values.
session-timeout (time; default: 0s) - session timeout (maximal allowed session time) for client. After
this time, the user will be logged out unconditionally
0 - no timeout
shared-users (integer; default: 1) - maximal number of simultaneously logged in users with the same
username
status-autorefresh (time | none; default: none) - HotSpot servlet status page autorefresh interval
transparent-proxy (yes | no; default: yes) - whether to use transparent HTTP proxy for the authorized
users of this profile
When idle-timeout or keepalive is reached, session-time for that user is reduced by the actual period of
inactivity in order to prevent the user from being overcharged.