American Power Conversion 400V Power Supply User Manual


 
Overview
12 Smart Distribution Panel with ATS
Front view, door open
The deadfront provides
access to the panel board for
maintenance and wiring.
The Source 1 input is
controlled by the Source 1
motorized switch. See
“Motorized switches” on
page 15 for more information
on the operation of this
switch.
The automatic operation
control panel sets whether
the generator is controlled
automatically. See
“Automatic operation control
panel” on page 16 for more
information.
The Source 1 lamp is green
when the Source 1 switch is
ON (closed).
The display interface
provides a local interface for
viewing status data,
configuring settings, and
operating the ATS. It has an
LCD, five-button interface,
basic status lights, and a beeper. See “Display Interface” on page 29 for detailed information on
operation and the contents of each screen.
The captive screw secures the deadfront, and can be loosened with a Phillips or standard screwdriver.
Sub-feed output breakers power equipment in the data center. For detailed information on installing
these breakers, see page 68.
The Source 2 lamp is green when the Source 2 switch is ON (closed).
The Source 2 input is controlled by the Source 2 motorized switch. See page 15 for more
information on how to operate this switch.
The latches open the deadfront after the captive screw in the middle right side of the deadfront is
loosened with a Phillips or standard screwdriver.