Filter
Top Products
Smart Distribution Panel with ATS 83
Appendix A: Custom Installations
If Source 2 is a Second Mains Connection
Differences in your system from information presented in this manual
This manual assumes that Source 2 is an APC InfraStruXure Generator. If you have a secondary
mains connected to the ATS, some of the information in this manual will not apply to your system.
Because your system does not have a generator, any reference to “generator” in this manual actually
refers to your second mains connection. Disregard the following sections, as they do not apply to
your system:
• “Generator start sequence” on page 7
• “Generator cool-down” on page 7
• “Fuel monitoring/runtime calculation” on page 9
• “Communication converter” on page 13 (item 4)
• “Resetting automatic operation on the generator” on page 20
• “Generator” on pages 37–38
• “Fuel Alarm Limits” on page 44