Filter
Top Products
Smart Distribution Panel with ATS 67
How to Allow Easy Access to the ATS
Display Interface
The front door of the ATS has a Plexiglas plate protecting access to the switches, circuit breakers, and
the display interface. If you want to prevent access to the display interface through the opening in the
front door, you can place the rectangle of Plexiglas (included) over the opening to cover the display
interface. Attach the Plexiglass using the self-adhesive, double-sided tape on the rectangle.
To remove the rectangle, open the front door and press firmly on the square from the outside of the
door, pressing toward the inside of the ATS. You may need to use a screwdriver or other flat tool to
pry the square from the inside of the door.