Filter
Top Products
Communication Configuration
Smart Distribution Panel with ATS 59
FTP and SCP
You can use FTP (enabled by default) or Secure CoPy (SCP) to transfer new firmware to the ATS, or
to access a copy of the ATS’s event logs. SCP provides the higher security of encrypted data
transmission and is enabled automatically when you enable SSH.
To access the ATS through FTP or SCP, the default user name and password are apc and apc for an
Administrator, or device and apc for a Device Manager. In the command line, use the IP address of
the unit.
Note
If you enable SSL and SSH for their high-security authentication and encryption,
disable FTP. Allowing file transfer to the ATS through FTP compromises the high
security you implement by choosing SSL and SSH. To disable FTP, you must be an
Administrator; use the FTP Server option of the Network menu.
See also
See the InfraStruXure Power Generation System’s online Network Management User’s
Guide to use FTP or SCP to retrieve log files from the ATS or to transfer firmware files
to the ATS.