Filter
Top Products
DCP Mode 2 Installation and Administration 11-5
_ ______________________________________________________________________________________
_ ______________________________________________________________________________________
_ ______________________________________________________________________________________
VERIFY THAT THE DAUGHTER
BOARD USES TRIC 4 CHIPS
(CODED 229EJ)
REMAIN THE SAME
E12
E13
E14
E15
E16
E17
E18
E19
E20
E21
E22
E23
IC6
IC6
IC3
IC5
IC5 FROM
D181470
IC4 FROM
D181470
JUMPER NO. 9 PLACED IN NEW
POSITION AS SHOWN (SEE
EXPLODED VIEW BELOW)
IC3
J9 GOES ACROSS
E13 AND E13
J4
J5
J6
THESE JUMPERS
Figure 11-3. MTDM Location of TRIC 4 Chips
6. Set the following options on the face of the MTDM. The arrows (< for left, > for right) indicate
which direction the rockers should be set. The speed shown is 9600 bps.
_ ________________________________________