Filter
Top Products
Introduction 1-3
_ ______________________________________________________________________________________
_ ______________________________________________________________________________________
_ ______________________________________________________________________________________
REMOTE NETWORKING
In a remote network, AUDIX systems are integrated with more than one switch. The local system can be
networked with up to 100 other remote AUDIX adjuncts. The local system is the one to which the
administration terminal the system administrator is using is connected; all other systems are considered
remote. These remote systems may be geographically distant, have different dial plans, and use different
connections such as:
• Digital Service (DS1) facilities between switches
• Voice-grade (analog) facilities between switches
Any remote network can be mixed with a local network. Switches can use any public or private switched
networking facility, or be a part of a Digital Communications System (DCS) network.
NETWORK PLANNING
Planning is an essential first step in setting up an AUDIX network. Network administration should not be
started until the local AUDIX system is running smoothly. Network planning should begin as soon as the
customer decides to network their AUDIX systems.
One person (perhaps someone also serving as the administrator of one of the AUDIX machines in the
network) must serve as coordinator of the network. The network coordinator must establish and maintain a
good line of communication with each of the remote system administrators in order to facilitate necessary
cooperation and flow of information. Because every AUDIX machine within the network must be
administered with information about any other AUDIX machine with which it will be exchanging
messages, the network coordinator must be prepared to supply each local AUDIX system administrator
with the information.
AUDIX NETWORK IMPLEMENTATION
Each AUDIX system in the network requires the following. Each item is explained in some detail on the
following pages:
• Specific releases of software.
• AUDIX Communications Controller (ACC) or AUDIX Communications Controller Enhanced (ACCE)
circuit pack.
• Specific issues of supporting circuit packs.
• Rear connector panel and backplane modifications.
• New network cabling used with most types of networks. When unique cabling and equipment are
required, they will be pointed out in chapters 2 through 7.
• AUDIX system translations must be added.