Filter
Top Products
11-26 DCP Mode 2 Installation and Administration
________________________________________________________________________________________________
________________________________________________________________________________________________
________________________________________________________________________________________________
3. Using Procedure 014, assign a custom BCCOS that is translated with all the speeds optioned for the
data modules in the modem pool. The custom BCCOS should mirror the default BCCOS 1 except
for the data rates chosen (BCCOS 1 automatically defaults to all speeds.)
In Figure 11-11, Manager II Administration for Digital Side of Modem Pooling (Proc 014, Word 1),
a custom BCCOS of 10 is shown as an example only.
ENHANCED MODE - PROCEDURE: 014, WORD: 1
BEARER CAPABILITY CLASS OF SERVICE - CALL OPTIONS
1. Bearer Capability COS: 10 DEFAULT CAPABILITIES
2. Transport Mode: 0 Circuit 14. Transport Mode: 0 Circuit
3. Information Type: 0 Restrict 15. Information Type: 0 Restricted
16. Bearer Capability: 2 Mode 2
CALL TYPES AND ACTION TAKEN
4. Voice: 0 Circuit switch the call
5. Voice Grade Data: 1 Insert a mode 2-to-analog modem pool facility
6. Mode 0: 0 Circuit switch the call
7. Mode 1: 0 Circuit switch the call
8. Mode 2: 0 Circuit switch the call
9. Mode 3: 0 Circuit switch the call
10. Unknown Digital: 0 Circuit switch the call
11. Unknown Analog: 1 Insert a mode 2-to-analog modem pool facility
12. Mode 3/2: 0 Circuit switch the call
13. X.25: 0 Circuit switch the call
Connected to CC0 ON-LINE ♥ MAJOR
MINOR RUN TAPE BUSY OUT IN USE WAIT
enter command: _
3 Data 5 Help 6 Field 7 Input 8 Cmds
Figure 11-11. Manager II Administration for Digital Side of Modem Pooling (Proc 014, Word 1)