Filter
Top Products
Chapter 1
1-2 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
Entering and Exiting the Command Modes
See Table 1-2 for an explanation of how to access and exit the command
modes.
Table 1-2. Entering and Exiting the Command Modes
Router Configuration Commands to configure the
routing protocols.
From Global mode, enter
router <protocol>
(dvmrp, igmp, ospf, rip,
or vrrp).
For DVMRP, OSPF,
and RIP: (configure
router:<protocol>)#
For IGMP and VRRP:
(configure)#
Interface Configuration Commands to configure the
interfaces.
From Global mode, enter
interface <interface-
name>.
(config-if: <interface-
name>)#
Mode Description To Access Prompt
2 of 2
Mode To Access Prompt Displayed To Exit
User Log in. > Enter exit.
Privileged From the User mode,
enter enable.
# Disable or exit returns to the
User mode.
Global
Configuration
From the Privileged
mode, enter configure.
(configure)# Exit returns to the Privileged
mode.
Router
Configuration
From Global mode, enter
router <protocol>
(dvmrp, igmp, ospf, rip,
or vrrp).
For DVMRP, OSPF, and
RIP:
(configure
router:<protocol>)#
For IGMP and VRRP:
(configure)#
Exit returns to the Global
Configuration mode.
End returns to the Privileged
mode.
Interface
Configuration
From Global mode, enter
interface <interface-
name>
(configure-
if:<interface-
name>)#
Exit returns to the Global
Configuration mode.
End returns to Privileged
mode.