Filter
Top Products
Document No. 10-300090, Issue 1 19-11
OSPF
Systems P550R, P580, P880, and P882.
<transit-delay> Estimated number of seconds it takes to transmit a link state
update packet over this virtual link. The value range is 1-
3600. The default is 1.
<passwd> Password to be used by neighboring routers. Any continuous
string of characters that you can enter from the keyboard up
to 8 bytes long. This string acts as a key that will allow the
authentication procedure to generate or verify the
authentication field in the OSPF header. This key is inserted
directly into the OSPF header when originating routing
protocol packets. A separate password can be assigned to
each network on a per-interface basis. All neighboring routers
on the same network must have the same password to be able
to route OSPF traffic.
message-digest-
key <key-id>
md5 <key>
Key identifier and password to be used by neighboring
routers and this router for MD5 authentication. The key id is a
number in the range 1 to 255. The key is an alphanumeric
string of up to 16 characters. All neighboring routers on the
same network must have the same key identifier and key to be
able to route OSPF traffic. There is no default value.
Table 19-8. Parameters, Keywords, Arguments
Name Definition
2 of 2