Filter
Top Products
Chapter 16
16-6 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
logging history
Command Mode Global Configuration.
Description Sets the type of syslog messages that are sent to the event log and shutdown
log. The no form of this command disables the type specified. The default
setting is {start | system | config| temp | resource | fan | power | service_port
| user_port | auth_failure | bridge_stat | switch_fabric | snmp | redundant_cpu
| unknown_mac | login_status | acl_log}.
Syntax
* Note: Use the logging protocol event command to enable protocol
event logging for specific protocols.
To Enable: logging history [{start | system | config | temp | resource |
fan | power | service_port | user_port | auth_failure |
bridge_stat | switch_fabric | ospf | dvmrp | rip | ldap | cli |
snmp | appletalk | redundant_cpu | vrrp | unknown_mac |
login_status | acl_log| ssl_ssh}]
To Disable: no logging history [logging console [{start | system |
config | temp | resource | fan | power | service_port |
user_port | auth_failure | bridge_stat | switch_fabric | ospf |
dvmrp | rip | ldap | cli | snmp | appletalk | redundant_cpu |
vrrp | unknown_mac | login_status | acl_log | ssl_ssh}]
Table 16-2. Parameters, Keywords, Arguments
Name Definition
start Logs starts of the system.
system Logs system events.
config Logs each configuration change (for example,
enabling and disabling ports).
temp Logs changes in temperature status. Temperature
status messages could precede a switch shutdown,
and are often critical.
resource Logs changes in system resources.
fan Logs fan status changes. Fan failures will
eventually lead to overheating the system. The fan
status message provides a good early warning for a
failure that could eventually cause the switch to
shut down.
1 of 3