Filter
Top Products
Chapter 16
16-16 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
set syslog facility
Command Mode Global Configuration.
Description Sets the event types, also called “facilities,” for which syslog events are
generated.
The no command stops generating syslog events for the event type that you
specify. The default setting is {system | config | switch_fabric}.
Syntax
* Note: Use the logging protocol event command to enable protocol
event logging for specific protocols.
To Enable: set syslog facility {start | system | config | temp |
resource | fan | service_port | user _port | power |
bridge_stat | switch_fabric | ospf | rip | ldap | appletalk
| auth_failure | redundant_cpu | dvmrp | cli | snmp |
unknown_mac | vrrp | login_status | acl_log | ssl_ssh |
all}
To Disable: no set syslog facility {start | system | config | temp |
resource | fan | service_port | user _port | power |
bridge_stat | switch_fabric | ospf | rip | ldap | appletalk
| auth_failure | redundant_cpu | dvmrp | cli | snmp |
unknown_mac | vrrp | login_status | acl_log | ssl_ssh |
all}
Table 16-7. Parameters, Keywords, Arguments
Name Definition
start Logs starts of the system.
system Logs system events.
config Logs each configuration change (for example,
enabling and disabling ports).
temp Logs changes in temperature status. Temperature
status messages could precede a switch shutdown,
and are often critical.
resource Logs changes in system resources.
1 of 3