Filter
Top Products
Document No. 10-300090, Issue 1 23-29
80-Series QoS
set port queue service wfq
Command Mode Global Configuration.
Description Sets a port, port range, or module to use weighted fair queueing (WFQ)
queue servicing. WFQ is the default queue-servicing algorithm.
Syntax set port queue service {{<mod-num> | <mod-swport-range>}[...,{<mod-
num> | <mod-swport-range>}] | all-ports} wfq {queue <queue> weight
<weight> | default}
Systems ■ P550R and P880, 80-series modules only.
■ P580 and P882.
Table 23-16. Parameters, Keywords, Arguments
Name Definition
<mod-num> The slot number of a module. If you specify <mod-
num>, all ports on the module are set to use WFQ.
<mod-swport-range> The slot number of a module, and, either a port number,
or a range of port numbers having the format Px-Py.
For example:
• To specify port 1 on the module in slot 3, enter 3/
1.
• To specify ports 1 through 5 on the module in
slot 3, enter 3/1-5.
If you specify <mod-swport-range>, the port or range
of ports that you specify is set to use WFQ.
all-ports All ports in the chassis. If you specify all-ports, all
ports on all modules in the chassis are set to use WQF.
<queue> The queue number, which can range from 0 to 7.
<weight> The weight that you want to assign to the queue.
Weights can range from 1 to 254.
default The default weights.