Filter
Top Products
Document No. 10-300090, Issue 1 28-21
Rapid Spanning Tree Protocol
Syntax set spantree portcost <mod-swport-range> [...,<mod-swport-range>]
<port-cost-value> {802.1D | vlan {<vlan-id> | name <vlan-name>}}
Table 28-13. Parameters, Keywords, Arguments
Name Definition
<mod-swport-
range>
The module and the port range.
<port-cost-value> Sets the path cost for this port. The ports that you prefer
be used by the spanning tree should have the lowest path
cost.
If the switch is running common Spanning Tree, the valid
range for this field is 0 to 65535.
If the switch is running Rapid Spanning Tree, the valid
range for this field is 0 to 200,000,000.
The default setting is 0. If this field is set to 0, the port
uses the default path cost for the bridge.
802.1D Use this keyword if the switch is running IEEE 802.1D
Spanning Tree. For a detailed description of IEEE
802.1D Spanning Tree, see Chapter 7, “Configuring
Rapid Spanning Tree,” in User Guide for the Avaya P580
and P882 Multiservice Switches, Software Version 6.1.
<vlan-id> The VLAN ID of the bridge in which the bridge port is
participating.
Use the vlan <vlan-id> keyword and variable when the
switch is running per-VLAN or dual-layer Spanning
Tree. For a detailed description of per-VLAN and dual-
layer Spanning Tree, see Chapter 7, “Configuring Rapid
Spanning Tree,” in User Guide for the Avaya P580 and
P882 Multiservice Switches, Software Version 6.1
<vlan-name> The VLAN name of the bridge in which the bridge port is
participating.
Use the vlan name <vlan-name> keyword and variable
when the switch is running per-VLAN or dual-layer
Spanning Tree. For a detailed description of per-VLAN
and dual-layer Spanning Tree, see Chapter 7,
“Configuring Rapid Spanning Tree,” in User Guide for
the Avaya P580 and P882 Multiservice Switches,
Software Version 6.1