Filter
Top Products
Document No. 10-300090, Issue 1 19-15
OSPF
ip ospf cost
Command Mode Interface Configuration.
Description Specifies the cost of sending a packet on an interface. The no form of this
command restores the default setting of 1. The valid range is 1 to 65534.
Syntax
Sample Output
The following command enables the cost of sending a packet on an
interface to 100.
(config-if:intf3)# ip ospf cost 100
Systems P550R, P580, P880, and P882.
To Configure: ip ospf cost <cost>
To Restore Default: [no] ip ospf cost
Table 19-10. Parameters, Keywords, Arguments
Name Definition
<cost> Unsigned integer value expressed as the link state metric. It can
be a value in the range 1 to 65534.