Filter
Top Products
Document No. 10-300090, Issue 1 3-9
Appletalk
appletalk mac-format
Command Mode Interface Configuration.
Description Sets which Appletalk Interface MAC format is to be used. The default value
is snap. The no form of this command resets the MAC format for the
interface to the default value.
Syntax
Sample Output The following example sets the Appletalk Interface MAC format to ethv2.
(config-if:serial0)# appletalk mac-format ethv2
Systems P550R, P580, P880, and P882.
To Configure: appletalk mac-format {ethv2 | snap}
To Restore Default: [no] appletalk mac-format
Table 3-7. Parameters, Keywords, Arguments
Name Definition
{ethv2 | snap} • ethv2 - Ethernet Version 2.
• snap - Subnetwork Access Protocol.