Filter
Top Products
Chapter 4
4-8 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
set buffering port (hipri-service-ratio)
Command Mode Global Configuration.
Description Set the output buffer high priority service ratio for a physical port. The
default setting is 1023-to-1.
Syntax set buffering port <mod-port-spec> output hipri-service-ratio {1-to-1 | 3-to-
1 | 7-to-1 | 15-to-1 | 31-to-1 | 63-to-1 | 127-to-1 | 255-to-1 | 511-to-1 | 1023-
to-1 | 2047-to-1 | 4095-to-1 | 8191-to-1 | 16383-to-1 | 32767-to-1}
Sample Output The following example sets the buffer high priority service ratio for
physical port 4/1 to 15-to-1.
(configure)# set buffering port 4/1 output hipri-service-ratio
15-to-1
Buffers for port 4/1 set.
Systems P550R, P580, P880, and P882.
Table 4-7. Parameters, Keywords, Arguments
Name Definition
<mod-port-spec> Specifies the module and the port.
output The output buffer.
hipri-service-ratio The high priority service ratios are: 1-to-1, 3-to-1, 7-to-1,
15-to-1, 31-to-1, 63-to-1, 127-to-1, 255-to-1, 511-to-1,
1023-to-1, 2047-to-1, 4095-to-1, 8191-to-1, 16383-to-1, or
32767-to-1.