Filter
Top Products
Chapter 19
19-6 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
area nssa
Command Mode OSPF Router Configuration.
Description Configure an area as a Not So Stubby Area (NSSA). To remove the NSSA
distinction from the area, use the no form of this command.
Syntax
Sample Output
The following command sets nssa on the indicated area.
(configure router:ospf)# area 2.0.0.0 nssa
The following command removes nssa from the indicated area.
(configure router:ospf)# no area 2.0.0.0 nssa
Systems P550R, P580, P880, and P882.
To Enable: area <area-id> nssa
To Disable: [no] area <area-id> nssa
Table 19-4. Parameters, Keywords, Arguments
Name Definition
<area-id> A decimal value or IP address that identifies an OSPF area. Use no
area <area-id> to remove an area from the software configuration.