Filter
Top Products
Document No. 10-300090, Issue 1 19-3
OSPF
area
Command Mode OSPF Router Configuration.
Description Defines an OSPF Area. To remove an area, use the no form of this
command.
Syntax
Sample Output The following command removes the OSPF Area from the indicated router.
(configure router:ospf)# no area 10.0.0.123
Systems P550R, P580, P880, and P882.
To Enable: area <area-id>
To Disable: [no] area <area-id>
Table 19-1. Parameters, Keywords, Arguments
Name Definition
<area-id> IP address that represents the area-id for the system.