Filter
Top Products
Chapter 11
11-28 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
ip mac-format
Command Mode Interface Configuration.
Description Sets the MAC format of the IP interfaces. The no form of this command
restores the default ethv2.
Syntax
Sample Output
The following example sets the MAC format of the IP interfaces, on the
interface labeled boston, to the Subnetwork Access Protocol (snap).
(config-if:boston)# ip mac-format snap
Systems P550R, P580, P880, and P882.
To Configure: ip mac-format {ethv2 | snap}
To Restore Default: no ip mac-format {ethv2 | snap}
Table 11-15. Parameters, Keywords, Arguments
Name Definition
{ethv2 | snap} Set the MAC format of the IP interface to either ethv2, which
is the default, or to snap (Subnetwork Access Protocol).