Filter
Top Products
Chapter 5: IP interface translations
54 Installing and Configuring the Avaya S8700-Series Server January 2008
Adding the IPSI to the system
Use the IP Server Interface Administration - Port Network SAT screen to add an IPSI. The
information on this screen differs, depending on whether the IP addresses of the IPSI are static
or assigned automatically through DHCP.
1. Type add ipserver-interface PNnumber and press Enter.
2. For the Host field and the DHCP ID fields for the primary IPSI and secondary IPSI, if any:
● For dynamic addressing, the DHCP server sets the Host field and the DHCP ID field.
Verify that the fields are populated with default data.
● For static addressing, in the Host field, enter the IP address for the IPSI that is listed in
the Location field.
3. Set the IP Control field to y.
add ipserver-interface 4 Page 1 of 1
IP SERVER INTERFACE (IPSI) ADMINISTRATION - PORT NETWORK 4
IP Control? y Socket Encryption? n
Ignore Connectivity in Server Arbitration? n Enable QoS? n
Administer secondary ip server interface board? y
Primary IPSI
------------
Location: 9A01
Host: ipsi-A09a
DHCP ID: ipsi-A09a
Secondary IPSI
--------------
Location: 9B01
Host: ipsi-A09b
DHCP ID: ipsi-A09b
add ipserver-interface 8
IP SERVER INTERFACE (IPSI) ADMINISTRATION - PORT NETWORK 8
IP Control? y Socket Encryption? n
Ignore Connectivity in Server Arbitration? n Enable QoS? n
Primary IPSI QoS Parameters
------------ --------------
Location: 1A01 Call Control 802.1p: 6
Host: 172.22.22.174 Call Control DiffServ: 46
DHCP ID: ipsi-A01a