Filter
Top Products
Setting locations (if necessary)
Installing and Configuring the Avaya S8700-Series Server January 2008
69
Setting locations (if necessary)
After you set the rules for daylight savings time, you must set the locations for all port networks.
Port networks can be in different time zones. Use SAT commands to set the locations for the
port networks.
1. Type change locations and press Enter.
2. In the ARS Prefix 1 Required for 10-Digit NANP Calls? field, type y.
3. Type the information in the various fields for each media gateway.
In the Name field for location 1, type Main.
4. Click Submit to save the changes.
Note:
Note: The location of a port network is defined on the SAT cabinet form (change
cabinet X). The location of a network region is defined on the SAT
ip-network-region form (change ip-network-region X). The Location field
in the ip-network-region form is part of the association to the
daylight-savings-rule by which a IP phone behaves.
change locations Page 1 of 5
LOCATIONS
ARS Prefix 1 Required For 10-Digit NANP Calls? y
Number Name Timezone Daylight-Savings Number Plan
Offset Rule Area Code
1 Main + 00:00 0
2 CA - 02:00 0
3 :
4 :
5 :
6 :
7 :
8 :
9 :
10 :
11 :