Filter
Top Products
Chapter 8: Installation verification
76 Installing and Configuring the Avaya S8700-Series Server January 2008
S8730 LEDs
Figure 7: LEDs on the front panel of the S8730 Server on page 76 and Figure 8: LEDs on the
back panel of the S8730 Server on page 77 show the LEDs on the S8730 Server.
Figure 7: LEDs on the front panel of the S8730 Server
Note:
Note: The Active/Standby LED, which is labeled as 1 in Figure 7, is on a push button.
When pushed, this button has no effect other than to turn off the LED
momentarily. The LED returns to the normal state within a few seconds after the
button is pushed.
Figure notes:
1. Active/standby LED
2. Internal health
3. External health
4. NIC 1 (Eth0) link/activity
5. NIC 2 (Eth1) link/activity
6. Power on/standby button/system power. Amber means
system shut down, but power still applied. Green means
system on. To turn off the power, press and hold the Power
button for several seconds.
7. Hard Drive LEDs
8. System Insight Display LEDs, which represent the system
board layout.
ms873lef LAO 082707
UID
1
2
FANS
INTER
LOCK
OVER
TEMP
I-PPM
DIMMS DIMMS
POWER
SUPPLY
POWER
SUPPLY
PCI
RISER
CAGE
PPM
PROCPROC
5
4
3
2
1
6
8
7