Filter
Top Products
5-40
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
OL-4211-03
Chapter 5 Configuring the Client Adapter
Setting Security Parameters
Enabling EAP-TLS
Follow the steps below to enable EAP-TLS authentication for this profile.
Step 1 Perform one of the following on the Profile Management (Security) window:
• If you want to enable EAP-TLS without WPA or WPA2, choose 802.1x under Set Security Options
and EAP-TLS in the 802.1x EAP Type drop-down box.
• If you want to enable EAP-TLS with WPA or WPA2, choose WPA/WPA2/CCKM under Set
Security Options and EAP-TLS in the WPA/WPA2/CCKM EAP Type drop-down box.
Note If you want to enable CCKM on the client adapter, you must choose the WPA/WPA2/CCKM
security option, regardless of whether you want the adapter to use WPA or WPA2. The
configuration of the access point to which your client adapter associates determines whether
CCKM will be used with 802.1x, WPA, or WPA2.
Note Refer to the “WPA and WPA2” section on page 5-18 for additional information.
Step 2 Click Configure. The Define Certificate window appears (see Figure 5-12).
Figure 5-12 Define Certificate Window